3756
/

    MOTORLAR


    NCT Motorlar 
    NCT servomotorların  geliştirilmesi, R&D ( ARGE) departmanımızın en başarılı ve en etkili geliştirmelerinden biridir. NCT A, Ai, AiS, AMS ve TORQUE motorlar azami ihtiyaçlara yanıt vermektedir.  Motorlarımızın mekanik yapı, ölçü, hız ve elektrik parametreleri  özellikle takım tezgah uygulamaları için geliştirilmiştir. Bu nedenle Ai motorlara, standart olarak  EnDat 2.2 absolute rotary enkoderler takılmıştır, tüm NCT servo motorlar  inkremental TTL veya sinuzoidal çıkış       ( SINCOS /1 Vpp ) ölçüm sistemi  opsiyonlarına sahiptir.
    NCT Senkron Servo Motorlar
    NCT servo motorlar 1 Nm – 75 Nm tork aralığında, 3 flanş ölçüsünde mevcuttur. Mil dizaynı ve bağlantı ana ölçüleri pek çok Japon üreticinin  benzer ölçüde motorları ile uyumludur.

      Definitions of the motor technical data
    M0 continuous torque at zero speed
    I0 line current at M0
    Pn rated continuous power
    Mn rated torque
    In line current at Mn
    nn rated speed
    Mmax maximal torque
    Imax line current at Mmax
    nmax maximal speed
    Ke voltage coefficient (no-load line voltage at 1000 min-1 speed)
    UDcbusz DC bus rated voltage of motor servo amplifier
     
     
    Designation of NCT synchronous servomotors
    Only the first part of model mark is in the following two charts. For example: AB3-54-30-….
    The second part of model mark contains the main options:
       
    1. -EH/4096 Standard type, cylindrical shaft without keyseat, with incremental encoder
    2. -EH/4096-Z1 Cylindrical shaft with keyseat without key, with incremental encoder
    3. -EH/4096-Z2 Tapered shaft with keyseat without key, with incremental encoder
    4. -EH/M Standard type, cylindrical shaft without keyseat, with multiturn absolute encoderl
    5. -EH/M-Z1 Cylindrical shaft with keyseat without key, with multiturn absolute encoder
    6. -EH/M-Z2 Tapered shaft with keyseat without key, with multiturn absolute encoderl
     
    The full model mark of this motor: AB3-54-30-EH/4096-Z1
     
     
    Click on the model number to show the outline drawing.
    Servomotors "A" series with ferrite magnets
    Type
    (without brake)
    Type
    (with brake)
    Static
    torque
    Static
    current
    Rated speed
    A1-54-30-..... AB1-54-30-..... 1.1 Nm 1.0 A 3000 min-1
    A2-54-30-..... AB2-54-30-..... 2.2 Nm 2.0 A 3000 min-1
    A3-54-30-..... AB3-54-30-..... 3.0 Nm 2.5 A 3000 min-1
    A6-54-30-..... AB6-54-30-..... 6.0 Nm 4.5 A 3000 min-1
    A9-54-30-..... AB9-54-30-..... 9.0 Nm 6.0 A 3000 min-1
    A12-54-20-..... AB12-54-20-..... 12.0 Nm 8.8 A 2000 min-1
    A22-54-20-..... AB22-54-20-..... 22.0 Nm 15.0 A 2000 min-1
    A30-54-20-..... AB30-54-20-..... 30.0 Nm 19.5 A 2000 min-1
    A38-54-20-.....
     
    AB38-54-20-..... 38 Nm 18.0 A 2000 min-1
     
    Click on the model number to show the outline drawing.

    "Ai" - Serisi senkron servo motorlar

    Type
    (without brake)
    Type
    (with brake)
    Dimension Static
    torque
    Static
    current
    Rated speed
    Ai2.5-54-40-..... AiB2.5-54-40-..... A1 2.5 Nm 2.3 A 4000 min-1
    Ai5-54-40-..... AiB5-54-40-..... A2 5.0 Nm 4.6 A 4000 min-1
    Ai8-54-40-..... AiB8-54-40-..... A3 8.4 Nm 7.1 A 3000 min-1
    Ai15-54-26-..... AiB15-54-26-..... A6 17.0 Nm 13.0 A 2600 min-1
    Ai28-54-25-..... AiB28-54-25-..... A12 29.0 Nm 18.8 A 2500 min-1
    Ai50-54-20-..... AiB50-54-20-..... A22 51.0 Nm 32.6 A 2000 min-1
    Ai70-54-20-..... AiB70-54-20-..... A30 70.0 Nm 40.0 A 2000 min-1
     
     
    NCT Asenkron Servomotorlar





      Definitions of the motor technical data
    M0 continuous torque at zero speed
    I0 phase current at M0
    Pn rated power
    Mn rated torque
    In phase current at Mn
    Un line voltage at Mn
    nn rated speed
    fn rated frequency
    Iµ magnetizing current
    cosφn power factor
    ηn efficiency
    nmgy limit speed of field weakening (constant power)
    Mmax maximum torque
    nmax maximum speed
     
      Click on the model number to show the outline drawing.
    NCT asynchronous motor chart
     
     <

    Motor model Note Rated
    power
    Pn
    Rated
    current
    In
    Rated
    torque
    Mn
    Rated
    speed
    nn
    Max.
    speed
    nmax
    Speed-Torque Curves
    AiS100LW15H  Flange 10.5 kW 24 A 67 Nm 1500 min-1 10000 min-1 Karakterisztika
    AiS100LW20H Flange 15 kW 32 A 72 Nm 2000 min-1 15000 min-1 Karakterisztika
    AiS100LW26H  Flange 20 kW 46 A 72 Nm 2650 min-1 15000 min-1  
    AiS132LW15H Flange 22 kW 55 A 140 Nm 1500 min-1 10000 min-1 Karakterisztika
    AiS132LW08-15H (Y/D) Flange 12.6/22 kW 29.4/48 A 140/140 Nm 860/1500 min-1 10000 min-1  
                   
    AMS112MW20H Power spindle 9.5 kW 27 A 45 Nm 2000 min-1 6000 min-1  
    AMS180SW20H Power spindle 22 kW 53 A 105 Nm 2000 min-1 6000 min-1  
    AMS180MW20H Power spindle 35 kW 91 A 167 Nm 2000 min-1 6000 min-1  
    AMS180MW10-25H (Y/D) Power spindle 18.2/23.4 kW 47.5/47.4 A 173.8/89.4 Nm 1000/2500 min-1 6000 min-1  
                   
    VM-90L-54-40-20-12 Feet+Flange 5,17 kW 9,99 A 24,7 Nm 2000 min-1 12000 min-1  
    VM-100M-54-40-15-08 Feet+Flange 8,92 kW 17,7 A 56,8 Nm 1500 min-1 8000 min-1  
    VM-100L-54-40-10-08 Feet+Flange 9.16 kW 18.75 A 87.5 Nm 1000 min-1 8000 min-1  
    VM-100L-54-40-15-08 Feet+Flange 13,08 kW 25,89 A 83,3 Nm 1500 min-1 8000 min-1  
    VM-100L-54-40-20-12 Feet+Flange 17,38 kW 33 A 83 Nm 2000 min-1 12000 min-1  
    VM-132S-54-40-15-08 Feet+Flange 17,37 kW 31,69 A 110,8 Nm 1500 min-1 8000 min-1  
    VM-132M-54-40-20-08 Feet+Flange 27,75 kW 47,88 A 132,5 Nm 2000 min-1 8000 min-1  
    VM-132L-54-40-15-08 Feet+Flange 26,17 kW 46,69 A 166,6 Nm 1500 min-1 6000 min-1  
    VM-160S-54-40-15-06 Feet+Flange 39,27 kW 70,12 A 250 Nm 1500 min-1 6000 min-1  
    VM-160M-54-40-05-06 Feet+Flange 19,44 kW 41,26 A 320 Nm 580 min-1 6000 min-1  
    VM-160L-54-40-10-06 Feet+Flange 35,08 kW 65,52 A 335 Nm 1000 min-1 6000 min-1  
    VM-180S-54-40-10-05 Feet+Flange 40,98 kW 78,4 A 391,3 Nm 1000 min-1 5000 min-1  
    VM-180M-54-40-05-05 Feet+Flange 34,01 kW 68,95 A 560 Nm 580 min-1 5000 min-1  
    VM-180M-54-40-10-05 Feet+Flange 57,6 kW 110,36 A 550 Nm 1000 min-1 5000 min-1  
    VM-180L-54-40-10-05 Feet+Flange 64,93 kW 122,89 A 620 Nm 1000 min-1 4500 min-1  
    VM-180L-54-40-15-05 Feet+Flange 90.01 kW 162.44 A 573 Nm 1500 min-1 4500 min-1  
    VM-180L-54-40-20-05 Feet+Flange 117.29 kW 202.5 A 560 Nm 2000 min-1 4500 min-1  
    VM-225S-54-40-05-04 Feet+Flange 40.39 kW 80.08 A 665 Nm 580 min-1 4000 min-1  
    VM-225S-54-40-10-04 Feet+Flange 68.07 kW 130.24 A 650 Nm 1000 min-1 4000 min-1